Product Name: 30kV 222K 2.2nF Axial Lead High Voltage Pulse Generator Capacitor
Information:
High Quality 30kV 222K 2.2nF Capacitor, Axial Lead High Voltage Capacitor, Pulse Generator Capacitor with Factory Price.
◆Features
*Low dissipation factor of 0.2% at 1 KHZ
*High frequency ≥550KHZ
*High current ≥20A
*High voltage ≥1.5 times
*High insulation resistance ≥200000MΩ
◆Applications
*High voltage power supplies;
*CO2 lasers, high voltage pulse generator
*X-ray equipment
*Smart grid
*Military Project
◆Ceramic Dielectric Properties
NO.
Ceramic Dielectric
Operating temperature Range(℃)
Insulation Resistance (≧MΩ)
Dissipation Factor≦
Temperature characteristics
1
N4700(DL)
-25~+85℃
200000
0.2%
+/-28%
◆Dimension & Lead Style
◆Ordering Information
No
Part Number
Ceramic Dielectric
Rated Voltage
(KV)
Capacitance
Dimensions(mm)
C
(pF)
TOL.
(%)
D
T
H
d
1
MZCT81-DL35-30KV-222K
DL(N4700)
30
2200
±10
35
15
15
1
◆About N4700 Ceramic
N4700 ceramic capacitor is a new type product which is successfully developed in recent years, this ceramic material is widely used in high-end products, compared to other ClassI ceramic, its dielectric constant is large, suitable for larger capacitance, resist higher voltage, dissipation factor less than 0.2%, much lower than the average classII ceramic; insulation resistance is over 200 000MΩ, better frequency and characteristics of the temperature coefficient, withstand more current, Its temperature variation of capacitance is within ±28% from -25°C to +85°C, it is of more than 10 years life time.
N4700 Capacitance change vs Temperature
◆Notes
(1) During transportation and storage
• Do not transport or store where the capacitor will be exposed to high temperature or high humidity.
• Do not expose to poisonous gases such as H2SO4, HCL or HNO3.
• Avoid excessive impact such as that caused by falling.
(2) During operation
• Avoid contact with electrolytes such as perspiration. Do not touch with bare hands.
• Avoid excessive impact such as that caused by falling.
• Do not apply solder to stud terminals.
• Do not re-machine the terminals.
(3) Usage
• When the capacitor is used for high-speed pulses such as with a laser, make sure that the impressed voltage (peak-to-peak volt-age) is within the capacitor’s rated specifications.
• Make sure that the capacitor is not exposed to radiation chamber or transformer.